J30t V6-2960cc 3.0L DOHC MFI (VG30DE) (1997)
For example:
Connecting rod big end grade number: 1
Crankshaft pin grade number: 2
Connecting rod bearing grade number = 1 + 2 = 3
ROD BUSHING CLEARANCE (SMALL END)
1. Measure inner diameter "C" of bushing.
2. Measure outer diameter "Dp" of piston pin.
3. Calculate connecting rod bushing clearance.
C - Dp = 0.005 - 0.017 mm (0.0002 - 0.0007 inch)
Limit: 0.023 mm (0.0009 inch)
4. If it exceeds the limit, replace connecting rod assembly or connecting rod bushing and/or piston set with pin.