J30t V6-2960cc 3.0L DOHC MFI (VG30DE) (1997)
Transmission Speed Sensor: Service and Repair
TURBINE REVOLUTION SENSOR REPLACEMENT
1. Remove exhaust tube front nuts on left and right sides.
2. Remove front tube after removing exhaust tube bracket.
3. Remove propeller shaft from vehicle.
4. Remove rear engine mounting member from A/T assembly while supporting A/T with jack.
5. Remove turbine revolution sensor from A/T assembly upper side.
6. Reinstall any part removed.
-
Always use new sealing parts.
REVOLUTION SENSOR REPLACEMENT
1. Remove revolution sensor from A/T assembly.
2. Reinstall any part removed.
-
Always use new sealing parts.