infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Body and Frame|Locks > < Rear Shelf|Service and Repair
Page 2
background image

6. Remove rear parcel shelf finisher mounting clip using a clip clamp remover.
7. Remove the following parts after removing rear parcel shelf finisher.

-

Rear speaker grille (for woofer)

-

High-mounted stop lamp

INSTALLATION

Install in the reverse order of removal.

CAUTION:  Make sure that clips are securely fitted in panel holes on body when installing, and then press them in.

Rear Window Sunshade

REMOVAL AND INSTALLATION

CAUTION:  Be careful not to damage the rear window glass.

Removal

1. Remove rear parcel shelf finisher.
2. Disconnect rear window sunshade harness connector.
3. Remove rear window sunshade mounting bolts.
4. Lift up rear window sunshade and pull out locating pin from body side panel hole, and then remove rear window sunshade.

Installation

Install in the reverse order of removal.

Body and Frame|Locks > < Rear Shelf|Service and Repair