M35 V6-3.5L (VQ35DE) (2006)
Fuel Gauge Sender: Service and Repair
Removal and Installation
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY
Components
Removal and Installation
REMOVAL
WARNING: Read "General Precautions" when working on the fuel system. Refer to "General Precautions".
1. Check fuel level on fuel gauge. If fuel gauge indicates more than the level as shown in the figure (full or almost full), drain fuel from fuel tank until
fuel gauge indicates level as shown in the figure.
NOTE: Because fuel will be spilled when removing main and sub fuel level sensor units for the top of the fuel is above the main and sub fuel
level sensor units installation surface.
-
As a guide, fuel level becomes the position as shown in the figure when approximately 20 l (5-1/4 US gal, 4-3/8 Imp gal) of fuel are drained
from fuel tank.