M35 V6-3.5L (VQ35DE) (2006)
Ignition Switch Lock Cylinder: Technical Service Bulletins
NATS/Intelligent Key/Ignition Lock - Registration
Classification:
EL05-001B
Reference:
ITB05-007B
Date:
September 7, 2005
2006 M35 / M45; INTELLIGENT KEY, NATS KEY, AND STEERING LOCK UNIT REGISTRATION
IMPORTANT:
THIS BULLETIN HAS BEEN REVISED. LOOK FOR THE THICK-BORDER BOX(ES) in the images and asterisks. Please refer to this bulletin
(ITB05-007B) for complete information. Discard all previous copies of ITB05-007.
APPLIED VEHICLES:
^
2006 M35 & M45 (Y50)
IF YOU CONFIRM:
A 2006 M35/M45 with the Technology option package requires service to the Intelligent Key system.
ACTIONS:
Use the information contained in this bulletin.
^
This bulletin covers new registration procedures for the Intelligent Key and Steering Lock Unit.
^
You'll need CONSULT-II and CONSULT-II converter with the NATS (purple) software card (AEN04A-1 or later) to perform the registration
Service Procedures in this bulletin.
^
Refer to Table A to determine which Service Procedure is required for the Specific Job Function.
^
When registering the Intelligent Key two registration procedures (ID registration for IVIS [NATS] and ID registration for Intelligent Key system)
should be performed.
^
ID Registration for the Intelligent Key System: This procedure registers the ID to the Intelligent Key unit.
^
ID Registration for IVIS [NATS]: This procedure registers the ID stored to the transponder (integrated into the Intelligent Key) to the BCM.
^
To turn the vehicle "ON" the start button must be pushed twice without pressing the brake pedal.
Note:
For proper operation of the Intelligent Key when used for starting the engine the Intelligent Key Fob should not be placed:
^
Inside the glove box
^
In the door pocket