M35 V6-3.5L (VQ35HR) (2009)
Cabin Air Filter: Service and Repair
IN-CABIN MICROFILTER
Removal and Installation
FUNCTION
Air inside passenger compartment is kept clean at either recirculation or fresh mode by installing in-cabin microfilter into blower unit.
When replacing filter, affix a caution label inside the glove box.
REPLACEMENT PROCEDURES
1. Remove glove box. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Locations/Instrument Panel.
2. Remove filter cover, and then remove in-cabin microfilter.
CAUTION:
If the filter is deformed/damaged when removing, replace it with a new one. Deformed/damaged filter may deteriorate the dust collecting
performance.
3. Take out in-cabin microfilter from blower unit.
4. Replace with new one and reinstall on blower unit.
CAUTION:
When installing, handle the filter with extreme care to avoid deforming/damaging.
5. Reinstall glove box.
