M35 V6-3.5L (VQ35HR) (2009)
13. Install heated oxygen sensor 2 harness (B) to clips (1).
14. Install control rod. Refer to See: Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/5AT RE5R05A/Control Rod Removal and
Installation.
15. Install rear propeller shaft. Refer to See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Rear Propeller
Shaft/Removal and Installation.
16. Install exhaust front tube and center muffler. Refer to See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Removal and
Installation.
17. Pour ATF into A/T assembly.
18. Connect the battery cable to the negative terminal.