M35x AWD V6-3.5L (VQ35DE) (2007)
Headlamp Alignment Control Module: Initial Inspection and Diagnostic Overview
Introduction
How to Proceed with Trouble Diagnosis
1. Confirm the symptom or customer complaint.
2. Understand operation description and function description. Refer to "System Description".
3. Perform the preliminary check. Refer to LT-151, "Preliminary Check". See: Preliminary Check
4. Perform self-diagnosis by CONSULT-II. Refer to LT-153, "SELF-DIAG RESULTS". See: Reading and Clearing Diagnostic Trouble Codes/With
Manufacturer's Scan Tool/Self-Diag Results
5. Check symptom and repair or replace the cause of malfunction.
6. Does the AFS operate normally? If YES: GO TO 7. If NO: GO TO 4.
7. INSPECTION END