M35x AWD V6-3.5L (VQ35DE) (2007)
Concept of Auto Active Test
-
IPDM E/R actuates auto active test mode when it receives door switch signal from BCM via CAN communication line. Therefore, when auto
active test mode is activated successfully, CAN communication between IPDM E/R and BCM is normal.
-
If any of systems controlled by IPDM E/R cannot be operated, possible cause can be easily diagnosed using auto active test.
CAN Diag Support MNTR
CAN DIAG SUPPORT MNTR
Refer to in Information Bus. See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Scan Tool Testing
and Procedures