M35x AWD V6-3.5L (VQ35HR) (2010)
Yaw Rate Sensor: Service and Repair
YAW RATE/SIDE G SENSOR
Removal and Installation
CAUTION:
-
Do not drop or strike yaw rate/side G sensor, because it has little endurance to impact.
-
Do not use power tool etc., because yaw rate/side G sensor is sensitive for the impact.
REMOVAL
1. Remove center console. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Locations/Instrument Panel,
"INSTRUMENT PANEL
: Component Parts Location".
2. Disconnect yaw rate/side G sensor harness connector.
3. Remove mounting bolts. Remove yaw rate/side G sensor (1).
INSTALLATION
Installation is the reverse order of removal.
Yaw rate/side G sensor mounting bolt: 6.5 Nm (0.66 kg-m, 58 in-lb)