M35x AWD V6-3.5L (VQ35HR) (2010)
13. Loosen mounting nuts in reverse order as shown in the figure to remove exhaust manifold.
A: Bank 1
B: Bank 2
White arrow: Engine front
NOTE:
Disregard the numerical order No. 7 and 8 in removal.
14. Remove gaskets.
CAUTION:
Cover engine openings to avoid entry of foreign materials.
INSPECTION AFTER REMOVAL
Surface Distortion
-
Check the surface distortion of the exhaust manifold mating surface with straightedge (A) and feeler gauge (B).
Limit: 0.7 mm (0.028 in)
-
If it exceeds the limit, replace exhaust manifold.
INSTALLATION
Note the following, and install in the reverse order of removal.
Exhaust Manifold Gasket