M35x AWD V6-3.5L (VQ35HR) (2010)
Headlamp Alignment Sensor: Service and Repair
ACTIVE AFS
Removal and Installation of Height Sensor
REMOVAL
1. Disconnect height sensor connector.
2. Remove height sensor link bracket mounting nut. (rear stabilizer side)
CAUTION:
Never remove from the installation nut of height sensor link bracket (height sensor link side).
3. Remove bolts, and remove height sensor.
INSTALLATION
Installation is the reverse order of removal.
CAUTION:
Tighten the bracket while pushing onto rear stabilizer when installing the installation nut of height sensor link bracket (stabilizer side).