M35x AWD V6-3.5L (VQ35HR) (2010)
SHIFT PATTERN CONTROL
MANUAL MODE : System Diagram
System Description
SHIFT PATTERN CONTROL
MANUAL MODE : System Description
INPUT/OUTPUT SIGNAL CHART
SYSTEM DESCRIPTION
-
The TCM receives the manual mode signal, not manual mode signal, manual mode shift up signal and manual mode shift down signal from unified
meter and A/C amp. via CAN communication line. The TCM shifts shift pattern control to the manual mode based on these signals, and then shifts
the A/T by operating each solenoid valve according to the shift operation of the driver.
-
The TCM prohibits the manual mode while being in fail-safe mode due to an A/T malfunction, etc. See: Transmission Control Systems/Testing
and Inspection/Initial Inspection and Diagnostic Overview/7AT RE7R01A/Fail-Safe.
Component Description
SHIFT PATTERN CONTROL
MANUAL MODE : Component Description