M45 V8-4.5L (VK45DE) (2006)
Power Distribution Module: Reading and Clearing Diagnostic Trouble Codes
With Generic Scan Tool
Information is not supplied by the manufacturer.
CONSULT-II Basic Operation
CONSULT-II BASIC OPERATION
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carry out CAN communication.
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, and then turn the ignition switch
ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch "IPDM E/R" on "SELECT SYSTEM" screen.
If "IPDM E/R" is not indicated, refer to "CONSULT-II Data Link Connector (DLC) Circuit".