M45x AWD V8-4.5L (VK45DE) (2008)
Trunk / Liftgate Weatherstrip: Service and Repair
Removal and Installation of Trunk Lid Weatherstrip
REMOVAL
Pull up and remove engagement with body from weatherstrip joint.
CAUTION: After removal, do not pull strongly on the weatherstrip.
INSTALLATION
1. Working from the lower section, align the weatherstrip seam with center of the striker and weatherstrip onto the vehicle.
2. After installation, pull the weatherstrip gently to ensure that there is no loose section.
NOTE: Make sure the weatherstrip is fit tightly at each corner and back door rear plate.