M45x AWD V8-4.5L (VK45DE) (2008)
^ 4 clips
^ 2 hooks
3. Disconnect the 2 heated mirror connectors.
4. Remove 4 screws from actuator assembly.
CAUTION:
^ The electrical connectors shown in Figure 5 look similar (they will plug into each others locations) but they are not interchangeable.
^ Pay attention to the actuator orientation and connector location.
5. Install the new actuator.
a. Swap connectors from the old actuator to the new actuator (see Figure 5 below).
b. Reinstall the 4 screws (see Figure 4 above).