M45x AWD V8-4.5L (VK45DE) (2008)
Rear
REAR DISC BRAKE
BR-27 Component
WARNING: Clean dust on caliper and brake pad with a vacuum dust collector to minimize the hazard of air borne particles or other
materials.
CAUTION:
^
While removing cylinder body, do not depress brake pedal because piston will pop out.
^
It is not necessary to remove bolts on torque member and brake hose except for disassembly or replacement of caliper assembly. In this
case, hang cylinder body with a wire so as not to stretch brake hose.
^
Do not damage piston boot.
^
If any shim is subject to serious corrosion, replace it with a new one.
^
Always replace shim and shim covers as a set when replacing brake pads.
^
Keep rotor free from brake fluid.
^
Burnish the brake pads and disc rotor mutually contacting surfaces after refinishing or replacing rotors, after replacing pads, or if a soft
pedal occurs at very low mileage.
Removal and Installation of Brake Caliper Assembly