infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC's P0133/P0153 Set|Page 269 > < Engine Controls - Rough Cold Idle|Page 264
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine Controls - MIL ON/DTC's P0133/P0153 Set

Classification: EC10-012

Reference: ITB10-032

Date: May 19, 2010

2011 M56; MIL ON WITH DTC P0133 AND / OR P0153

APPLIED VEHICLE: 2011 M56 (Y51)

IF YOU CONFIRM:

The MIL is 'ON' with DTC P0133 and / or P0153 (Air Fuel (A/F) Ratio Sensor 1 circuit slow response, B1or B2) stored in the ECM

AND

There are no drivability issues due to this condition.

ACTION:

1. Refer to Step 2 in the Service Procedure to confirm this bulletin applies to the vehicle you are working on.

2. If this bulletin applies, reprogram the ECM.

NOTE:

Do not replace either A/F sensor for this incident, if it should occur.

CLAIMS INFORMATION

IMPORTANT

The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE
PROCEDURE as it contains information that is essential to successfully completing this repair.

SERVICE PROCEDURE

1. Connect CONSULT III (C-III) to the vehicle to begin the reprogramming procedure.

Engine Controls - MIL ON/DTC's P0133/P0153 Set|Page 269 > < Engine Controls - Rough Cold Idle|Page 264