infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Cassette Player/Console - Trim Gaps|Page 14490 > < Cassette Player/Console - Trim Gaps|Page 14488
Page 3
background image

5.

Move the front seats forward and remove the two trim plugs and screws located at the rear of the center console assembly (see Figure 4).

6.

Remove the center console as follows:

A.

Pull back and lift up (at the same time) on the rear of the console assembly until it is released (see Figure 5).

B.

Once released, tilt the front end of the console upward to gain access to the wire harness connectors located inside and to the rear of the
console assembly.

C.

Disconnect the harness connector for the 12V power receptacle and the light (see Figure 5).

7.

Adjust the cassette player as follows:

Cassette Player/Console - Trim Gaps|Page 14490 > < Cassette Player/Console - Trim Gaps|Page 14488