Q45 V8-4.5L (VK45DE) (2002)
CAUTION: Do not hold oil filler neck (right bank) not to damage it.
INSTALLATION
1. Apply liquid gasket to joint part of cylinder head and camshaft bracket following the steps.
NOTE: Illustration shows an example of left-bank side (zoomed in shows No. 1 camshaft bracket). Apply only to No. 1 camshaft bracket for
right-bank side.
a. Refer to illustration "a" to apply liquid gasket to joint part of No. 1 and No. 6 camshaft bracket and cylinder head.
b. Refer to illustration "b" to apply liquid gasket in 90° to illustration "a".
Use Genuine Ultra Grey RTV Silicone Sealant Part No. 999MP-AM003P or equivalent.
2. Install rocker cover.
Check if rocker cover gasket is dropped from installation groove of rocker cover.
ROCKER COVER - BOLT TORQUE SEQUENCE
3. Tighten bolts two steps separately in order numbers in illustration.
Tightening Torque:
1st step:
................................................................................................................................................... 1.0 - 3.0 Nm (0.1 - 0.31 kg-m, 9 - 26 inch lbs.)
2nd step:
............................................................................................................................................... 7.4 - 9.3 Nm (0.75 - 0.95 kg-m, 66 - 82 inch lbs.)
4. Install in the reverse order of removal after this step.