infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Reading and Clearing Diagnostic Trouble Codes|Page 15780 > < Reading and Clearing Diagnostic Trouble Codes|Page 15778
Page 16
background image

If an error occurred before the ignition switch was turned to ON and does not occur again until the "Self-diagnosis" is completed, the diagnosis result
will be judged normal. Therefore, those errors in the past, which cannot be found by the "Self-diagnosis," must be found by diagnosing the "History of
Errors". The History of Errors displays the time and place of the most recent occurrence of that error. However, take note of the following points.

-

Correct time of the error occurrence may not be displayed when the GPS antenna substrate within the AV and NAVI control unit has
malfunctioned.

-

Place of the error occurrence is represented by the position of the current-location mark at the time when the error occurred. If the current-location
mark has deviated from the correct position, then the place of the error occurrence cannot be located correctly.

-

The maximum number of occurrences which can be stored is 50. For the 51st and later occurrences, the displayed number remains 50.

Part 1

Reading and Clearing Diagnostic Trouble Codes|Page 15780 > < Reading and Clearing Diagnostic Trouble Codes|Page 15778