Q45 V8-4.5L (VK45DE) (2002)
Fuel Gauge Sender: Service and Repair
Removal and Installation
REMOVAL
WARNING: Be sure to read "General Precautions" when working on fuel system. Refer to "General Precautions".
1. Release fuel pressure.
Refer to "FUEL PRESSURE RELEASE".
2. Open fuel filer lid.
3. Open the filler cap and release the pressure inside the fuel tank.
4. Open the trunk lid and remove the trunk front finisher.
5. Disconnect battery ground cable.
6. Disconnect the harness connector, fuel feed tube and fuel return tube.
-
Remove the quick connectors of the fuel tube as follows.
NOTE: The followings are also applied to the quick connector of EVAP tube.