Q45 V8-4.5L (VK45DE) (2002)
Fusible Link
A melted fusible link can be detected either by visual inspection or by feeling with finger tip. If its condition is questionable, use circuit tester or test
lamp.
CAUTION:
a. If fusible link should melt, It Is possible that a critical circuit (power supply or large current carrying circuit) is shorted. In such a case, carefully
check these circuits and eliminate cause of problem.
b. Never wrap periphery of fusible link with vinyl tape. Extreme care should be taken with this link to ensure that it does not come Into contact with
any other wiring harness, or vinyl or rubber parts.
How to Follow/Perform Trouble Diagnosis
How To Follow Test Groups In Trouble Diagnosis
How to Follow Test Groups in Trouble Diagnosis
1. Work and diagnostic procedure
Start to diagnose a problem using procedures indicated in enclosed test groups.
2. Questions and required results.
Questions and required results are indicated in bold type in test group.