Q45 V8-4.5L (VK45DE) (2002)
Step 4: TCM Initialization Procedure (red/white card)
45.
Remove the ORANGE reprogram card from CONSULT-II and insert the RED diagnostic card.
46.
Confirm the shift lever is in the Park ("P") position, turn the ignition key to the ON position (do not start), and then wait for CONSULT-II to "boot
up".
47.
Press:
^
START
^
A/T
^
ECU Part Number
48.
Confirm that the new 1CM part number is displayed.
49.
Press:
^
BACK (1x)
^
SELF DIAG RESULTS
WARNING:
The following steps are performed with the ignition key in the ON position but with the engine OFF (i.e., engine NOT running).
50.
Depress the brake pedal and move the shift lever to the Reverse ("R") position.
51.
Release the brake pedal and fully depress the accelerator pedal.
52.
With the accelerator pedal fully depressed:
^
Press "ERASE"
^
Press "YES"
^
Wait 10 seconds
^
Press "BACK" (1x)
53.
Release the accelerator pedal and turn the ignition key to the OFF position.
NOTE:
The ignition key does NOT need to be in the ON position in order to move the shift lever back to the Park "P" position (as directed in the next step).
54.
Depress the brake pedal and move the shift lever to the Park ("P") position.