Q45 V8-4.5L (VK45DE) (2002)
6.
From the "CONSULT UTILITIES" screen, select "ECM DATA" (see Figure 7).
7.
The "ECM DATA REPROGRAMMING" screen will be displayed (see Figure 8):
NOTE:
^
This is a special ECM reprogram and the following steps are used FOR THIS INCIDENT ONLY!
^
An ECM ID CODE must be entered to get the Reprogramming data from ASIST.
^
This is different from the typical ECM Reprogramming procedures now in use.
^ The general procedure for most other incidents will remain as usual (i.e., enter Model Year and Model to look up ECM data in ASIST).
A.
Click on the Key Pad button (see Figure 8).