Q45 V8-4.5L (VK45DE) (2002)
1.
Click on the Key Pad button (see Figure 4).
2.
Using the digit keys on the Key Pad (see Figure 5 shown), enter ECM ID Code. See "Chart A", for the ECM ID Code.
3.
Then click the "Continue" button on the keypad.
4.
Click the "Continue" button on the ECM Data Reprogramming screen (see Figure 6) to proceed to CONSULT-II setup.
5.
Perform ECM Reprogramming from CONSULT-II to update the car's ECM data (to the new Part Number).
6.
When ECM Reprogramming is done, test drive the vehicle. See "Vehicle Test Drive" below.