Q45 V8-4.5L (VK45DE) (2002)
F.
Touch the Address number on the CONSULT-II screen (titled "Configure Ethernet"). A numeric keypad will appear (see Figure 5).
NOTE:
The IP Address for the ASIST PC you are working on will be different from the Address shown in Figure 5.
G.
Use the key pad to set the CONSULT-II Address to match the ASIST PC IP Address with the exception that the CONSULT-II Address
number ends with 176.
H.
Touch "SAVE" and then press "COPY" to print the Address for future reference.
I.
Turn off CONSULT-II to allow the new Address to be saved in memory.
J.
On the ASIST PC close the "IP Configuration" window, close the "MS-DOS Prompt" window, then proceed with step 5.
5.
Launch ASIST. From the ASIST PC main menu screen, select "CONSULT UTILITIES" (see Figure 6).