infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

ABOUT US
Variable Valve Timing Actuator Position Sensor > < Component Tests and General Diagnostics|Page 5866

Q45 V8-4130cc 4.1L DOHC MFI (VH41) (1998)

Page 1
background image

Transmission Position Switch/Sensor: Adjustments

INHIBITOR SWITCH ADJUSTMENT

1. Remove manual control linkage from manual shaft of A/T assembly.
2. Set manual shaft of A/T assembly in "N" position.
3. Loosen inhibitor switch fixing bolts.

4. Insert pin into adjustment holes in both inhibitor switch and manual shaft of A/T assembly as near vertical as possible.
5. Reinstall any part removed.
6. Check continuity of inhibitor switch.

Variable Valve Timing Actuator Position Sensor > < Component Tests and General Diagnostics|Page 5866