Q45 V8-4494cc 4.5L DOHC (VH45) (1992)
Power Seat Control Module: All Technical Service Bulletins
Seat - Intermittent Memory Loss of Set Position
Classification:
BF92-006
Section:
Body & Frame
Models:
1990-1991 Q45
Date:
May 1, 1992
Reference:
TECHNICAL BULLETIN ITB92-027
SEAT POSITION MEMORY LOSS (ADP) This bulletin amends ITB91-051 and includes updated VIN information.
APPLIED MODEL:
1990-91 Q45 (G50) produced prior to November 30, 1990
APPLIED VIN:
prior to JNKNG01C*MM108485
SERVICE INFORMATION
Some customers may complain about an intermittent memory loss of the seat set position which they have programmed into the automatic drive
positioner (ADP).
A possible cause may be inadvertent contact with the seat adjust or seat memory switches located on the door panel when exiting the vehicle with the
ignition OFF. If the seat adjust or seat memory switch(s) are touched, the ADP will record the current position.
A new ADP control unit is available which incorporates a 0.40 second time delay before recording any inputs from the memory switches. In addition, the
new control unit includes a function which will allow the steering column to be adjusted in fixed increments.
PARTS INFORMATION
Description
New Part Number
Former Part Number
ADP Control unit
98800-60U01
98800-60U00