Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
Speedometer Module: Description and Operation
With the ignition switch in the ON or START position, power is supplied
^
through 7.5 A fuse [No. [4] located in the fuse block (J/B)]
^
to combination meter terminal (41).
Ground is supplied
^
to combination meter terminals (14), (31), and (43)
^
through body grounds (M14) and (M47).
The vehicle speed sensor provides a voltage signal to the combination meter for the speedometer.
The voltage is supplied
^
to combination meter terminals (8) and (9) for the speedometer
^
from terminals (1) and (2) of the vehicle speed sensor.
The speedometer converts the voltage into the vehicle speed displayed.