Q45t V8-4130cc 4.1L DOHC MFI (VH41) (1997)
DISASSEMBLY
1. Remove valves at parallel pins. Do not use a magnetic hand.
a. Use a wire paper clip to push out parallel pins.
b. Remove parallel pins while pressing their corresponding plugs and sleeves. Remove plug slowly to prevent internal parts from jumping out.
c. Place mating surface of valve facedown, and remove internal parts. If a valve is hard to remove, place valve body facedown and lightly tap it
with a soft hammer. Be careful not to drop or damage valves and sleeves.