infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

4WD System - 4X4 Lamp ON, Wheels Bind Or Drag|Page 9397 > < Fluid Pump, Transfer Case|Specifications
Page 1
background image

Technical Service Bulletin # 99-042

Date: 990826

4WD System - 4X4 Lamp ON, Wheels Bind Or Drag

Classification:
TF99-001

Reference:
ITB99-042

Date:
August 26, 1999

1998-99 QX4 4WD WARNING LAMP ON' CONTINUOUSLY 

APPLIED VEHICLE: 
1998-99 QX4 (JR50)

SERVICE INFORMATION

If a 1998-99 QX4 exhibits either of the symptoms listed below, the cause may be a severed/broken 4WD solenoid valve ground wire.

^

4WD warning lamp flashes three times and then stays on continuously each time the vehicle is started

^

The wheels seem to bind or drag when making turns

Use the following service procedure to resolve the incident.

PARTS INFORMATION

CLAIMS INFORMATION

Submit a Primary Failed Part (PP) line using the claims coding.

Service Procedure

1.

Confirm the 4WD warning lamp is on and the vehicle is in 2WD mode.

2.

Confirm if the following conditions exist:

^

4WD warning lamp flashes three times and then stays on continuously each time the vehicle is started

^

"Duty Solenoid Failure" DTC is stored

A.

If the conditions listed above do not occur, look for other causes of the incident.

B.

If either one of the conditions listed above occur, proceed with step 3.

4WD System - 4X4 Lamp ON, Wheels Bind Or Drag|Page 9397 > < Fluid Pump, Transfer Case|Specifications