QX4 2WD V6-3.5L (VQ35DE) (2003)
Coolant Temperature Sensor/Switch (For Computer): Diagnostic Aids
How to Check Terminals
SERVICE INFORMATYION FOR ELECTRICAL INCIDENT
HOW TO PROBE CONNECTORS
Connector damage and an intermittent connection can result from improperly probing of the connector during circuit checks. The probe of a Digital
Multimeter (DMM) may not correctly fit the connector cavity. To correctly probe the connector, follow the procedures below using a "T" pin. For the
best contact grasp the "T" pin using an alligator clip.