QX4 2WD V6-3.5L (VQ35DE) (2003)
4. Secure the inner cloth which covers the side air bag module with nuts.
5. Connect side air bag module connector.
6. Install seatback board with new clips.
7. Connect both battery cables.
8. Go to "SRS Operation Check", RS-38 and perform self-diagnosis to ensure entire SRS operates properly. (Use CONSULT- II or air bag warning
lamp.)
Driver Air Bag Module and Spiral Cable
Driver Air Bag Module And Spiral Cable
DRIVER AIR BAG MODULE AND SPIRAL CABLE
REMOVAL
CAUTION: Before servicing SRS, turn the ignition switch off, disconnect battery ground cable and wait at least 3 minutes.
Always work from the side of air bag module.