QX56 V8-5.6L (VK56DE) (2004)
^
You'll need to align the square corners of the rivnut with the square corners of the hole.
^
Squeeze the handles on the Rivnut Gun until they are completely closed.
NOTE:
You'll have to squeeze very hard.
7.
Remove the mandrel from the rivnut by turning the adjusting knob left (counterclockwise).
8.
Apply strips of self adhesive urethane foam pad around the entire front opening of the new support bracket.
^
Use foam pad (P/N 76268-9E005) from the Squeak and Rattle Kit.