QX56 V8-5.6L (VK56DE) (2004)
Parking Brake Control: Service and Repair
PARKING BRAKE CONTROL
Components
Removal and Installation
REMOVAL
1. Remove lower instrument panel and center console.
2. Remove floor trim. .
3. Remove adjusting nut.
CAUTION: Do not reuse adjusting nut after removing it.
4. Remove the lock plate from the front cable.
5. Remove front parking brake cable bolts and nut.
6. Disconnect return spring from equalizer.
7. Disconnect the front parking brake cable from the equalizer and remove front cable.
8. Remove rear disc rotors.
9. Remove parking brake shoes, and remove rear cable from toggle lever.
10. Remove equalizer from right and left rear cables.
11. Remove right and left rear cable bolts and nuts, then remove right and left rear cables.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: Do not reuse adjusting nut after removing it.
^
Adjust parking brake.