QX56 V8-5.6L (VK56DE) (2004)
Parking Brake Shoe: Service and Repair
PARKING BRAKE SHOE
Removal and Installation
COMPONENTS
REMOVAL
WARNING: Clean the brakes with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
NOTE: Remove the disc rotor only with the parking brake pedal completely disengaged.
1. Remove the rear disc rotor.
2. Remove the rear drive shaft.
3. Disconnect ABS sensor at harness connector. Then remove ABS sensor wire from grommet mounts.
4. Remove wheel hub and bearing assembly.
^
Withdraw ABS sensor harness through back plate when removing wheel hub and bearing assembly.
5. Remove the return springs.
6. Remove the adjuster.
7. Remove the retainers, anti-rattle pins and shoes.
8. Disconnect the parking brake cable from the toggle lever.
9. Remove back plate.
INSPECTION AFTER REMOVAL
Lining Thickness Inspection