QX56 V8-5.6L (VK56DE) (2004)
9. When "U/D CORRECT" value indicates ± 4, confirm that the value remains within ± 4 at least for 2 seconds while nothing is touching the ICC
sensor.
When "COMPLETED THE VERTICAL AIMING OF LASER BEAM" appears on screen, touch "END".
CAUTION: Be sure that the margin of "U/D CORRECT" is within ± 4 when the ICC sensor unit is untouched.
10. Confirm that "ADJUSTING AUTOMATIC HORIZONTAL LASER BEAM AIMING" is on screen and wait while the horizontal adjustment is
made automatically. (maximum: 10 seconds).
11. Confirm that "NORMALLY COMPLETED" is displayed on CONSULT-II and close the aiming adjustment procedure by touching "END".
CAUTION: Complete all the procedures once "LASER BEAM ADJUST" mode is entered in CONSULT-II. When the procedure is
discontinued, the ICC system is inoperable.
CHECK AFTER THE ADJUSTMENT
Test the ICC system by performing the ICC System Running Test. Refer to "ICC System Running Test".