QX56 V8-5.6L (VK56DE) (2004)
1. Install the magnet coil.
CAUTION: Be sure to align the magnet coil pin with the hole in the compressor front head.
2. Install the magnet coil harness clip using a screwdriver.
3. Install the pulley assembly using Tool and a wrench, then install the snap ring using snap ring pliers.
Tool number : KV99234330 (J-38873-A)
4. Install the clutch disc on the compressor shaft, together with the original shim(s). Press the clutch disc down by hand.
5. Install the clutch pulley bolt using Tool, to prevent the clutch disc from turning and tighten the bolt to specification. Refer to Heating and Air
Conditioning/Diagrams/Exploded Views.
Tool number : J-44614 ( - )
CAUTION: After tightening the clutch pulley bolt, check that the clutch pulley rotates smoothly.