QX56 V8-5.6L (VK56DE) (2004)
Brake Light Switch: Testing and Inspection
STOP LAMP SWITCH
1. Turn ignition switch OFF.
2. Disconnect stop lamp switch harness connector.
3. Check harness continuity between stop lamp switch terminals 1 and 2 under the given conditions.
If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 3 again.
STOP LAMP SWITCH
1. Disconnect stop lamp switch harness connector.
2. Check continuity between stop lamp switch terminals 1 and 2 under the given conditions.
3. If NG, adjust stop lamp switch installation, refer to "BRAKE PEDAL", and perform step 2 again.