QX56 V8-5.6L (VK56DE) (2004)
c.
Touch [SET DATE] (see Figure 2).
1)
If the date is not correct touch the [MONTH], [DAY] or [YEAR] as needed. Then adjust it by using arrow keys. Once done press
press [BACK] and go to step d.
2)
If the date is OK press [BACK] and go to step d.
d.
Touch [SET TIME] (see Figure 2).
1)
If time is not correct touch the [HOUR], [MINUTE] or [AM/PM] as needed. Then adjust it by using arrow keys. After you are done
press SAVE press [BACK] and go to step 5.
2)
If time is OK press [BACK] and go to step 5.
IMPORTANT NOTE
^
If your ASIST PC has already been set up to perform ECU reprogramming proceed to step 5.
^
If you are unsure whether your ASIST PC has already been set up for ECU reprogramming, look in ASIST, under CONSULT Utilities >
CONSULT-II Info > INFINITI > ECU Reprogramming. This will give you instructions for setting the Ethernet (IP) Address of the ASIST PC
and CONSULT-II. You will need to do this before performing ECU reprogramming.
DOWNLOAD (TRANSFER) DATA FROM ASIST INTO CONSULT-II (8 MB Orange Card)
5.
From the ASIST PC main menu screen select CONSULT UTILITIES (see Figure 3).