QX56 AWD V8-5.6L (VK56DE) (2005)
9. When "U/D CORRECT" value indicates ±4, confirm that the value remains within ±4 for at least 2 seconds while nothing is touching the ICC
sensor. When "COMPLETED THE VERTICAL AIMING OF LASER BEAM" appears on screen, touch "END".
CAUTION: Be sure that the margin of "U/D CORRECT" is within ±4 when the ICC sensor unit is untouched.
10. Confirm that "ADJUSTING AUTOMATIC HORIZONTAL LASER BEAM AIMING" is on screen and wait while the horizontal adjustment is
made automatically. (maximum: 10 seconds).
11. Confirm that "NORMALLY COMPLETED" is displayed on CONSULT-II and close the aiming adjustment procedure by touching "END".
CAUTION: Complete all the procedures once "LASER BEAM ADJUST" mode is entered in CONSULT-II. When the procedure is
discontinued, the ICC system is inoperable.
CHECK AFTER THE ADJUSTMENT
Test the ICC system by performing the ICC System Running Test. Refer to ACS-9, "ICC System Running Test". See: Cruise Control/Testing and
Inspection