QX56 AWD V8-5.6L (VK56DE) (2005)
Valve Cover: Service and Repair
ROCKER COVER
Removal and Installation
REMOVAL
1. Remove the engine room cover using power tool.
2. Remove the air duct and resonator assembly. Refer to "REMOVAL" (for left bank only).
3. Move the harness on the upper rocker cover and its peripheral aside.
4. Remove the electric throttle control actuator, loosening the bolts diagonally (for left bank only).
5. Remove the ignition coil.
6. Remove the PCV hose from the PCV control valve.
7. Loosen the bolts in reverse order shown using power tool.
CAUTION: Do not hold the rocker cover by the oil filler neck (right bank).
INSTALLATION