QX56 AWD V8-5.6L (VK56DE) (2005)
Submit a Campaign (CM) line claim using the claims coding table.
Disclaimer
Procedures A & B
PROCEDURE A: TRAILER LIGHTS WIRING CONNECTOR TERMINAL CHECK
Check the condition of the BCM by performing a terminal check at the Trailer Lights Wiring Connector (near the trailer hitch) as follows.
1.
Turn the ignition switch to the ON position.
2.
Make sure the combination switch and hazard switch are OFF.
3.
Using a Test Light check for power at terminals # 2 and # 5 (see Figure 1).