QX56 RWD V8-5.6L (VK56DE) (2006)
Rear Vision Camera: Service and Repair
Removal and Installation of Rear View Camera
Removal and Installation of Rear View Camera
REMOVAL
1. Remove back door lower finisher. Refer to "BACK DOOR TRIM".
2. Remove license lamp finisher.
3. Disconnect rear view camera connector.
4. Remove screws (2) and remove rear view camera.
INSTALLATION
NOTE: After installing rear view camera, perform side distance guideline correction procedure. Refer to "SIDE DISTANCE GUIDELINE
CORRECTION PROCEDURE".
Installation is in the reverse order of removal.