QX56 RWD V8-5.6L (VK56DE) (2006)
Carpet: Service and Repair
FLOOR TRIM
Removal and Installation
REMOVAL
1. Remove front seats.
-
Remove subwoofer.
-
Remove navigation display control unit.
2. Remove second row seats. Refer to "Second Row Outboard" and "Second Row Center", if equipped.
3. Remove third row rear seats.
4. Remove lower seat belt anchors.
5. Remove lower body side trim. Refer to "BODY SIDE TRIM".
6. Remove luggage lower side finishers (left / right).
7. Remove kicking plates. Refer to "BODY SIDE TRIM".
8. Remove center console. Refer to "INSTRUMENT PANEL ASSEMBLY".
9. Remove rear console, if equipped.
10. Remove rear lower finisher. Refer to "LUGGAGE FLOOR TRIM".
11. Remove carpet.
12. Remove floor mat hook from front carpet.
INSTALLATION
Installation is in the reverse order of removal.