QX56 RWD V8-5.6L (VK56DE) (2006)
Brake Pad: Service and Repair
Rear
Removal and Installation of Brake Pad
REMOVAL
1. Remove tires from vehicle with power tool.
2. Remove mounting bolt from the top mount.
3. Swing cylinder body open, and remove pads.
INSTALLATION
1. Push piston in so that pad is firmly attached and mount cylinder body to torque member.
NOTE: Using a disc brake piston tool (commercial service tool), makes it easier to push in the piston.
CAUTION: By pushing in piston, brake fluid returns to master cylinder reservoir tank. Watch the level of the surface of reservoir tank.
2. Install pads to cylinder body.
3. Install top mounting bolt and tighten to specification.
4. Check brake for drag.
5. Install tires to the vehicle. Refer to "Rotation".