QX56 RWD V8-5.6L (VK56DE) (2006)
13. Loosen the camshaft sprocket bolts as shown and remove the camshaft sprocket.
CAUTION: To avoid interference between valves and pistons, do not turn crankshaft or camshaft when timing chain is disconnected.
14. Repeat the same procedure to remove the right timing chain and associated parts.
INSPECTION AFTER REMOVAL
Check for cracks and any excessive wear at link plates. Replace chain if necessary.
^
In the same way as for the left bank, inspect the timing chain and associated parts on the right bank.
INSTALLATION
NOTE:
^
The above figure shows the relationship between the mating mark on each timing chain and that of the corresponding sprocket, with the
components installed.
^
To install the timing chain and associated parts, start with those on the right bank. The procedure for installing parts on the left bank is omitted