QX56 RWD V8-5.6L (VK56DE) (2006)
Body Control Module: Reading and Clearing Diagnostic Trouble Codes
CONSULT-II Inspection Procedure
CONSULT-II INSPECTION PROCEDURE
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carries out CAN communication.
1. With ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to data link connector and turn ignition switch ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch BCM on SELECT SYSTEM screen.
If "BCM" is not indicated, go to GI-39, "CONSULT-II Data Link Connector (DLC) Circuit". See: Computers and Control Systems/Data Link
Connector/Diagrams/Electrical Diagrams/Schematic