QX56 RWD V8-5.6L (VK56DE) (2006)
Headlamp Switch: Service and Repair
Headlamp Aiming Switch
REMOVAL AND INSTALLATION
Removal
1. Remove cluster lid A. Refer to "INSTRUMENT PANEL ASSEMBLY".
2. Carefully release the headlamp aiming switch retaining pawls and remove the switch.
Installation
Installation is in the reverse order of removal.
Switch Circuit Inspection
Using a circuit tester, check continuity between the headlamp aiming switch connector terminals in each operation status of the aiming switch.
Resistor tolerance : ±5%